How to flash stock ROM using SP flash tool

Flash stock ROM using SP flash tool

SP flash tool is the among of the best smartphone flash tool to use. In this article i will guide you to use SP flash tool (Smart Phone Flash Tool) to install the custom ROM on your android device.

Requirements: Your phone must have at least 40%-50% of battery and USB Drivers.


Must Read: How to unlock android Phone after too many pattern attempts

Let's follow all steps carefully to use SP flash tool.

1. Download and Install the android USB drivers on your Computer. You can skip this step if you have already installed them.

2. Switch Off your Android Phone and remove the battery if it is removable.

3. Then download the stock ROM or the custom ROM which you wish to install on your Phone. After download extract zip file on your Computer.

4. Now download the SP flash Tool on your Computer and then extract downloaded zip file on your Computer. As you can see the following files listed.

5. From the files listed run the Flash_tool.exe file

6. When the SP Flash tool is started, click on the Scatter-Loading button that located on the right side

7. Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/ directory.

8. Now click the Download button to stert the downloading process.

9. After completed all the above steps, Connect your Smart Phone to your computer using(through) USB Cable and press any button other than power button so that your system will detect your device. You can use volume buttons.

10. When flashing process is completed, a green ring will appear on your Computer. Now disconnect your device and  switch it ON. You are Done!

How to submit robot.txt to Google Search Console

This is very important SEO tips for blogger to understand for better ranking and increase the number of qualified traffic from google.  If your robot.txt got some errors google will stop crawling your website. so that it is better to update and submit your robot.txt to Google proactively. if you owned a website in Google Search Console . Just follow these few steps to submit your website.

Must Read: Add Alexa Rank Widget in blogger

1. First of all, Click on Crawl > robot.txt Tester in Google Search Console

2. Then, click on Submit button below the robots.txt file text area.
3. You will see pop up as i shown below with three options. Click on submit button next to "Ask Google to update"

4. You are done.. Wait after some minutes/hours then go and check robots.txt in Tester page again. You should see your robot.txt updated.


 Conclusion: If this article is useful for you, Make sure you share it through all social networks.